Mouse ST2/IL-33R DuoSet ELISA

Discontinued Product

DY1004 has been discontinued.
View all ST2/IL-33R products.
Mouse ST2 / IL-33 R ELISA Standard Curve
1 Image
Product Details
Procedure
Citations (2)
FAQs
Supplemental Products
Reviews

Mouse ST2/IL-33R DuoSet ELISA Summary

Assay Type
Solid Phase Sandwich ELISA
Format
96-well strip plate
Sample Volume Required
100 µL
Assay Range
0.3 - 20 ng/mL
Sufficient Materials
For fifteen 96-well plates*
Specificity
Please see the product datasheet

* Provided that the recommended microplates, buffers, diluents, substrates and solutions are used, and the assay is run as summarized in the Assay Procedure provided.

This DuoSet ELISA Development kit contains the basic components required for the development of sandwich ELISAs to measure natural and recombinant mouse ST2 / IL-33 R. The suggested diluent is suitable for the analysis of most cell culture supernate samples. Diluents for complex matrices, such as serum and plasma, should be evaluated prior to use in this DuoSet ELISA.

Product Features

  • Optimized capture and detection antibody pairings with recommended concentrations save lengthy development time
  • Development protocols are provided to guide further assay optimization
  • Assay can be customized to your specific needs
  • Economical alternative to complete kits

Kit Content

  • Capture Antibody
  • Detection Antibody
  • Recombinant Standard
  • Streptavidin conjugated to horseradish-peroxidase (Streptavidin-HRP)

Other Reagents Required

DuoSet Ancillary Reagent Kit 2 (5 plates): (Catalog # DY008) containing 96 well microplates, plate sealers, substrate solution, stop solution, plate coating buffer (PBS), wash buffer, and Reagent Diluent Concentrate 2.

The components listed above may be purchased separately:

PBS: (Catalog # DY006), or 137 mM NaCl, 2.7 mM KCl, 8.1 mM Na2HPO4, 1.5 mM KH2PO4, pH 7.2 - 7.4, 0.2 µm filtered

Wash Buffer: (Catalog # WA126), or equivalent

Reagent Diluent: 1% BSA in PBS, pH 7.2-7.4, 0.2 m filtered (R&D Systems Catalog # DY995). Quality of BSA is critical (see Technical Hints).

Blocking Buffer: 1% BSA in PBS, pH 7.2-7.4, 0.2 m filtered (R&D Systems Catalog # DY995). Quality of BSA is critical (see Technical Hints).

Substrate Solution: 1:1 mixture of Color Reagent A (H2O2) and Color Reagent B (Tetramethylbenzidine) (Catalog # DY999)

Stop Solution: 2 N H2SO4 (Catalog # DY994)

Microplates: R&D Systems (Catalog # DY990), or equivalent

Plate Sealers: ELISA Plate Sealers (Catalog # DY992), or equivalent

Scientific Data

Mouse ST2 / IL-33 R ELISA Standard Curve

Product Datasheets

You must select a language.

x

Preparation and Storage

Shipping
The product is shipped at ambient temperature. Upon receipt, store it immediately at the temperature recommended below.
Stability & Storage
Store the unopened product at 2 - 8 °C. Do not use past expiration date.

Background: ST2/IL-33R

ST2, also known as IL-1 R4, is a component of the receptor for the proinflammatory cytokine Interleukin-33. The IL-33 receptor additionally includes IL-1 RAcp which also associates with IL-1 RI and IL-1 R rp2/IL-1 R6. A soluble form of ST2 functions as a decoy receptor. IL-33 promotes Th2-biased immune responses, resulting in eosinophilia, mast cell activation, and allergic inflammation. In addition, IL-33 enhances inflammation-associated hypernociception and protects from atherosclerosis and cardiac myocyte hypertrophy. Soluble ST2 is elevated in the serum under inflammatory conditions including allergic asthma, sepsis, trauma, dengue fever, pulmonary disease, and lupus. It is also associated aortic stenosis, congestive cardiomyopathy, and risk of cardiovascular heart failure and death.

Long Name:
Interleukin 33 Receptor
Entrez Gene IDs:
9173 (Human); 17082 (Mouse)
Alternate Names:
DER4; DER4ST2growth stimulation-expressed; Fit-1; IL-1 R4; IL1R4; IL-1R4; IL-1RL1; IL-33 R; IL33R; IL-33R; interleukin 1 receptor-like 1; interleukin 1 receptor-related protein; interleukin-1 receptor-like 1; Ly84; MGC32623; Protein ST2; ST2; ST2L; ST2V; T1; T1homolog of mouse growth stimulation-expressed

Assay Procedure

 

GENERAL ELISA PROTOCOL

Plate Preparation

  1. Dilute the Capture Antibody (to the working concentration stated in the product datasheet ) in PBS without carrier protein. Immediately coat a 96-well microplate with 100 µL per well of the diluted Capture Antibody. Seal the plate and incubate overnight at room temperature.
  2. Aspirate each well and wash with Wash Buffer, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (400 µL) using a squirt bottle, manifold dispenser, or autowasher. Complete removal of liquid at each step is essential for good performance. After the last wash, remove any remaining Wash Buffer by aspirating or by inverting the plate and blotting it against clean paper towels.
  3. Block each well of the microplate as recommended in the product datasheet. Incubate at room temperature for a minimum of 1 hour.

    Note: The recommended Reagent Diluent typically contains 1% BSA. Some DuoSet Development Kits require alternative blocking agents, or for plates to be blocked overnight with a higher percentage of BSA, please see the product datasheet for details.
     
  4. Repeat the aspiration/wash as in step 2. The plates are now ready for sample addition.

 

PRECAUTION
The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face and clothing protection when using this material.

Assay Procedure

  1. Add 100 µL of sample or standards in Reagent Diluent, or an appropriate diluent, per well. Cover with an adhesive strip and incubate 2 hours at room temperature.
  2. Repeat the aspiration/wash as in step 2 of Plate Preparation.
  3. Add 100 µL of the Detection Antibody, diluted in Reagent Diluent (as recommended in the product datasheet), to each well. Cover with a new adhesive strip and incubate 2 hours at room temperature.
  4. Repeat the aspiration/wash as in step 2 of Plate Preparation.
  5. Add 100 µL of the working dilution of Streptavidin-HRP to each well. Cover the plate and incubate for 20 minutes at room temperature. Avoid placing the plate in direct light.
  6. Repeat the aspiration/wash as in step 2.
  7. Add 100 µL of Substrate Solution to each well. Incubate for 20 minutes at room temperature. Avoid placing the plate in direct light.
  8. Add 50 µL of Stop Solution to each well. Gently tap the plate to ensure thorough mixing.
  9. Determine the optical density of each well immediately, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. If wavelength correction is not available, subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.

Citations for Mouse ST2/IL-33R DuoSet ELISA

R&D Systems personnel manually curate a database that contains references using R&D Systems products. The data collected includes not only links to publications in PubMed, but also provides information about sample types, species, and experimental conditions.

2 Citations: Showing 1 - 2
Filter your results:

Filter by:

  1. Control of allergen-induced inflammation and hyperresponsiveness by the metalloproteinase ADAMTS-12.
    Authors: Paulissen G, El Hour M, Rocks N, Gueders M, Bureau F, Foidart J, Lopez-Otin C, Noel A, Cataldo D
    J Immunol, 2012-09-07;189(8):4135-43.
    Species: Mouse
    Sample Types: Tissue Homogenates
  2. IL-33 is produced by mast cells and regulates IgE-dependent inflammation.
    Authors: Hsu CL, Neilsen CV, Bryce PJ
    PLoS ONE, 2010-08-03;5(8):e11944.
    Species: Mouse
    Sample Types: Cell Culture Supernates

FAQs

No product specific FAQs exist for this product, however you may

View all ELISA FAQs
Loading...

Reviews for Mouse ST2/IL-33R DuoSet ELISA

There are currently no reviews for this product. Be the first to review Mouse ST2/IL-33R DuoSet ELISA and earn rewards!

Have you used Mouse ST2/IL-33R DuoSet ELISA?

Submit a review and receive an Amazon gift card.

$25/€18/£15/$25CAN/¥75 Yuan/¥2500 Yen for a review with an image

$10/€7/£6/$10 CAD/¥70 Yuan/¥1110 Yen for a review without an image

Submit a Review